ESP Primer Makes Any Oil Or Water Based Paint Stick To Shiny Smooth Surfaces Without Sanding Or Mess.

Mouse or Click on the Photos For More Information On Same.

PROPERTIES:

• Cleans old painted or varnished surfaces and leaves a thin grip film before recoating.
• Makes oil or water based paints to stick to any smooth non-porous surface.
• No tiresome or dusty sanding required.
• May be painted over any time after 2 hours or up to 7 days later.
• Easy to use... wipe on with a clean cotton cloth or brush.
• Will not damage old coatings.
• Reduces surface preparation time.

WHERE TO USE:

• Lacquers, baked enamels, varnishes, gloss paint, powder coated steel,
• Ceramics : bathroom or kitchen.
• Melamine : kitchen cabinet makeover, furniture
• Glass, tiles, uPVC, Fibreglass, Melamine, powder coated metal, previously glossed or varnished surfaces,

RECOMMENDATIONS BEFORE APPLICATION

• Ensure new finish is compatible with the old finish.
• Do not overcoat with 2 pack finishes, cellulose, xylene and urethane coatings . (oil or water based only)
• Remove any loose and flaking old finish.
• For greasy, waxed or varnished surfaces, scrub surface with a green scourer or 00 steel wool soaked with ESP. Wipe off all ESP after 5-10 minutes then follow application instructions below.
• Wipe up ESP before drying. Use clean clothes and change them regularly.
• Do not contaminate new clean ESP with old used ESP.
• Do not use ESP for dipping.

APPLICATION

• Apply a liberal application of ESP.
• Leave to stand 5 minutes then lightly wipe over the surface in one direction with a clean cloth to remove excess ESP.
• Allow ESP to dry for 2 hours, before applying the finish.

Coverage when diluted : 18 m²/l

Application tools : Brush, roller, rag.

Application temperature : +5°C to +35°C

Recoating time : 2h to 7 days.

Clean-up : Soap + Water