Available in our Tallaght Store
Tor Chlorinated Rubber Finish is a quick drying chemical resistant finish for use in swimming pools, breweries, factories, abattoirs, etc, where high humidity rules out conventional paints.
The finish should only be applied to substrates which have been correctly prepared and primed with the appropriate chlorinated rubber primer.
Features & Benefits
- Chemical-resistant, chlorinated rubber finish
- Quick-drying – touch dry in 1 hour, hard dry in 3 hours
- See further below for drying times
- Ideal for use in high humidity areas, such as:
- Swimming pools
- Factories
- Abattoirs
- Breweries
- Good coverage up to 12.5 square metres per litre
- Only comparatively thin films result from this product; therefore multi coats may be required for adequate protection or “high build” types considered.
- Use with Tor TH25 for thinning when required
- Clean equipment with Tor TH19
- Dry film remains sensitive to solvents, oil and fats
- Refer below for more product information, preparation and application instructions
Product Information
Chlorinated rubber binder pigmented with inorganic pigments and thinned with aromatic hydrocarbon solvent.
| Product reference | CR501 |
| Volume solids | 45% |
| Typical thickness | 35 microns dft from 80 microns wet |
| Theoretical coverage | 12.5 square metres per litre |
| Practical coverage | 10 square metres per litre |
| VOC content | EU limit value for this product (cat A/i): 500 g/l . This product contains max 500 g/l VOC |
Surface Preparation
Torsan “A” Chlorinated Rubber Finish should only be applied to substrates which have been correctly prepared and primed with the appropriate chlorinated rubber primer.
Application Details
| Mix ratio | N/A |
| Method of application | Brush or airless spray (0.015″ tip and 2500 psi atomising pressure) |
| Thinner | Tor TH25 (when required) |
| Cleaner | Tor TH19 for cleaning equipment |
| Pot Life | N/A |
Drying Times
| Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
|---|---|---|---|---|
| Minimum | Maximum | |||
| 20°C | 1 hour | 3 hours | 2-3 hours | Unlimited |
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Storage and Handling
Store in a safe place out of the reach of children
Flash point
- Above 32°C
Shelf life
- 2 years in unopened containers
Limitations
Dry film remains sensitive to solvents, oil and fats.
Only comparatively thin films result from this product and therefore multi coats may be required for adequate protection or “high build” types considered.
- Avoid skin and eye contact i.e. wear gloves, goggles, etc
- Ensure good ventilation, mechanical if necessary
- Store and use away from heat and flame
- Do not eat or smoke in the vicinity of work
- Wash hands before eating
- Refer to supply container for additional warning labels
Chlor Rubber Line Paint Yellow 5LT
€98.40 (incl. VAT)
81 in stock
