Owatrol ESP Primer 1ltr

ESP Primer Makes Any Oil Or Water Based Paint Stick To Shiny Smooth Surfaces Without Sanding Or Mess.

Mouse or Click on the Photos For More Information On Same.

PROPERTIES:

• Cleans old painted or varnished surfaces and leaves a thin grip film before recoating.
• Makes oil or water based paints to stick to any smooth non-porous surface.
• No tiresome or dusty sanding required.
• May be painted over any time after 2 hours or up to 7 days later.
• Easy to use... wipe on with a clean cotton cloth or brush.
• Will not damage old coatings.
• Reduces surface preparation time.

WHERE TO USE:

• Lacquers, baked enamels, varnishes, gloss paint, powder coated steel,
• Ceramics : bathroom or kitchen.
• Melamine : kitchen cabinet makeover, furniture
• Glass, tiles, uPVC, Fibreglass, Melamine, powder coated metal, previously glossed or varnished surfaces,

RECOMMENDATIONS BEFORE APPLICATION

• Ensure new finish is compatible with the old finish.
• Do not overcoat with 2 pack finishes, cellulose, xylene and urethane coatings . (oil or water based only)
• Remove any loose and flaking old finish.
• For greasy, waxed or varnished surfaces, scrub surface with a green scourer or 00 steel wool soaked with ESP. Wipe off all ESP after 5-10 minutes then follow application instructions below.
• Wipe up ESP before drying. Use clean clothes and change them regularly.
• Do not contaminate new clean ESP with old used ESP.
• Do not use ESP for dipping.

APPLICATION

• Apply a liberal application of ESP.
• Leave to stand 5 minutes then lightly wipe over the surface in one direction with a clean cloth to remove excess ESP.
• Allow ESP to dry for 2 hours, before applying the finish.

Coverage when diluted : 18 m²/l

Application tools : Brush, roller, rag.

Application temperature : +5°C to +35°C

Recoating time : 2h to 7 days.

Clean-up : Soap + Water